News & Insights
Practical articles on standards, audits and the Cornerstone platform — written by the team that implements them.
ISO 22716
01.07.2026 · 3 min read
ISO 22716 Section 5 covers equipment design, calibration, cleaning, and maintenance. Here is what manufacturers need in place and why calibration gets flagged so often.
Read more
ISO 22716
02.07.2026 · 3 min read
ISO 22716 Section 6 covers purchasing, receipt, identification, storage, and release of raw materials and packaging. Here is where supplier approval becomes a GMP requirement.
Read more
ISO 22716
13.07.2026 · 3 min read
ISO 22716 Section 16 sets out how internal audits should be approached, who should conduct them, and what happens to the findings.
Read more
ISO 22716
12.07.2026 · 3 min read
ISO 22716 Section 14 covers how complaints should be investigated and how a product recall should be coordinated if it becomes necessary.
Read more
ISO 22716
11.07.2026 · 3 min read
ISO 22716 Sections 13 and 15 are both brief but cover a critical distinction — planned changes versus unplanned, temporary departures from specified requirements.
Read more
ISO 22716
10.07.2026 · 3 min read
ISO 22716 Section 12 sets out the obligations of contract givers and contract acceptors. Here is what needs to be in place when any part of GMP-covered work is outsourced.
Read more
ISO 22716
09.07.2026 · 2 min read
ISO 22716 Section 11 is short but specific about how waste should be classified, handled, and disposed of without creating a contamination risk.
Read more
ISO 22716
08.07.2026 · 2 min read
ISO 22716 Section 10 covers what happens to rejected and reprocessed product once a result has confirmed it does not meet specification.
Read more
ISO 22716
07.07.2026 · 3 min read
ISO 22716 Section 9.5 governs how out-of-specification laboratory results must be reviewed and investigated. Here is why this clause gets so much audit attention.
Read more
ISO 22716
06.07.2026 · 3 min read
ISO 22716 Section 9 sets out requirements for test methods, acceptance criteria, sampling, and retain samples in the quality control laboratory.
Read more
ISO 22716
05.07.2026 · 3 min read
ISO 22716 Section 8 covers release, storage, shipment, and returns for finished cosmetic products. Here is what positive release actually means in practice.
Read more
ISO 22716
04.07.2026 · 3 min read
ISO 22716 Section 7.3 covers the controls required for filling, labelling, and packaging finished cosmetic products, including line identification and work-in-process handling.
Read more
ISO 22716
03.07.2026 · 3 min read
ISO 22716 Section 7.2 covers the controls required for bulk manufacturing — documentation, start-up checks, batch numbering, and in-process control.
Read more
